ABOUT HOSVER
A few days ago our company came to a customer, complaining that the automatic pipe cutter bought before the cut out of the nozzle uneven, slightly deformed, and also with burrs, asked me how to solve this problem? At that time, I was a little entangled, because these problems are process problems, either from the existing automatic pipe cutting machine to find problems, or buy grinding and polishing equipment for secondary processing. Of course, the best way is to replace a better pipe cutter.
If you are looking for problems from your existing automatic pipe cutting machine, you may wish to check whether the clamp is not tight or too tight, because both of these cases may lead to deformation or burrs in the pipe. In addition, you need to check whether the saw blade is sharp, or buy a better saw blade to cut. If the above two situations are excluded, it is likely that the mechanical problems such as insufficient power or slow cutting speed of the equipment itself cause uneven or burrs at the nozzle. For this situation, only a better pipe cutter can be considered.
If you consider using the second option, that is, purchasing additional polishing tools for secondary processing, you can perfectly solve the problems such as burrs. However, this will lead to an increase in the company's production process, slower production speed, increased production costs, more than worth the loss. If the nozzle requirements are not very high, it is recommended not to use this method as much as possible.
If you want to consider replacing a better pipe cutting machine, hope that one processing can achieve no deformation of the nozzle, no burrs, then you may wish to know about the latest intelligent pipe cutting machine developed by Wheatsford Automation. Compared with the automatic pipe cutting machine currently on the market, Longxin intelligent pipe cutting machine has five advantages: First, automatic feeding, one person operating multiple sets without problems, saving labor and production costs; Second, cutting the nozzle is comparable to laser cutting, no burrs and no deformation; Three, can automatically identify the material head and tail and cut off, can cut different specifications of pipe at one time, almost zero tail; four, more accurate, can reach the national standard tolerance range, very good to ensure the quality of the nozzle; five, reasonable price, a little more expensive than the current automatic pipe cutting machine on the market, but the new process for customers to cut pipe is simpler, more efficient, more cost-effective!